Rice U. Chemists Create 3-D Printed Graphene Foam

 

Rice U. Chemists Create 3-D Printed Graphene Foam - Electronics Featured Graphene
Laser sintering was used to 3-D print objects made of foam, a 3-D version of atomically thin graphene. At left is a photo of a fingertip-sized cube of graphene foam; at right is a close-up of the material as seen with a scanning electron microscope. (Image courtesy of Tour Group/Rice University)

HOUSTON — (June 21, 2017) — Nanotechnologists from Rice University and China’s Tianjin University have used 3-D laser printing to fabricate centimeter-sized objects of atomically thin graphene.

The could yield industrially useful quantities of bulk graphene and is described online in a new study in the American Chemical Society journal ACS Nano.

 

“This study is a first of its kind,” said Rice chemist James Tour, co-corresponding author of the paper. “We have shown how to make 3-D graphene foams from nongraphene starting materials, and the method lends itself to being scaled to graphene foams for additive manufacturing applications with pore-size control.”

Graphene, one of the most intensely studied nanomaterials of the decade, is a two-dimensional sheet of pure carbon that is both ultrastrong and conductive. Scientists hope to use graphene for everything from nanoelectronics and aircraft de-icers to batteries and bone implants. But most industrial applications would require bulk quantities of graphene in a three-dimensional form, and scientists have struggled to find simple ways of creating bulk 3-D graphene.

For example, researchers in Tour’s lab began using lasers, powdered sugar and nickel to make 3-D graphene foam in late 2016. Earlier this year they showed that they could reinforce the foam with carbon nanotubes, which produced a material they dubbed “rebar graphene” that could retain its shape while supporting 3,000 times its own weight. But making rebar graphene was no simple task. It required a pre-fabricated 3-D mold, a 1,000-degree Celsius chemical vapor deposition (CVD) process and nearly three hours of heating and cooling.

Rice U. Chemists Create 3-D Printed Graphene Foam - Electronics Featured Graphene

3-D graphene foam objects are produced by shining a laser on a mixture of powdered sugar and nickel powder. The laser is moved back and forth to melt sugar in a 2-D pattern, and nickel acts as a catalyst to spur the growth of graphene foam. The process is repeated with successive layers of powder to build up 3-D objects. (Image courtesy of Tour Group/Rice University)

In the latest study, a team from Tour’s lab and the labs of Rice’s Jun Luo and Tianjin’s Naiqin Zhao adapted a common 3-D printing technique to make fingertip-size blocks of graphene foam. The process is conducted at room temperature. No molds are required and the starting materials are powdered sugar and nickel powder.

“This simple and efficient method does away with the need for both cold-press molds and high-temperature CVD treatment,” said co-lead author Junwei Sha, a former student in Tour’s lab who is now a postdoctoral researcher at Tianjin. “We should also be able to use this process to produce specific types of graphene foam like 3-D printed rebar graphene as well as both nitrogen- and sulfur-doped graphene foam by changing the precursor powders.”

Three-D laser printers work differently than the more familiar extrusion-based 3-D printers, which create objects by squeezing melted plastic through a needle as they trace out two-dimensional patterns. In 3-D laser sintering, a laser shines down onto a flat bed of powder. Wherever the laser touches powder, it melts or sinters the powder into a solid form. The laser is rastered, or moved back and forth, line by line to create a single two-dimensional slice of a larger object. Then a new layer of powder is laid over the top of that layer and the process is repeated to build up three-dimensional objects from successive two-dimensional layers.

The new Rice process used a commercially available CO2 laser. When this laser was shone onto the sugar and nickel powder, the sugar was melted and the nickel acted as a catalyst. Graphene formed as the mixture cooled after the laser had moved on to melt sugar in the next spot, and Sha and colleagues conducted an exhaustive study to find the optimal amount of time and laser power to maximize .

Rice U. Chemists Create 3-D Printed Graphene Foam - Electronics Featured Graphene

James Tour

The foam created by the process is a low-density, 3-D form of graphene with large pores that account for more than 99 percent of its volume.

“The 3-D graphene foams prepared by our method show promise for applications that require rapid prototyping and manufacturing of 3-D carbon materials, including energy storage, damping and sound absorption,” said co-lead author Yilun Li, a graduate student at Rice.

Tour is the T.T. and W.F. Chao Chair in Chemistry as well as a professor of computer science and of materials science and nanoengineering at Rice.

Additional co-authors include Rodrigo Villegas Salvatierra, Tuo Wang, Pei Dong, Yongsung Ji, Seoung-Ki Lee, Chenhao Zhang, Jibo Zhang and Pulickel Ajayan, all of Rice, and Robert Smith of Qualified Rapid in West Jordan, Utah.

The research was supported by the Air Force Office of Scientific Research and its Multidisciplinary University Research Initiative, the China Scholarship Council, the State Key Program of National Natural Science of China, the National Natural Science Foundation of China, the Special Foundation for Science and Technology Major Program of Tianjin and Universal Laser Systems.

-30-

High-resolution IMAGES are available for download at:

http://bit.ly/2sSPEZI
CAPTION: Laser sintering was used to 3-D print objects made of graphene foam, a 3-D version of atomically thin graphene. At left is a photo of a fingertip-sized cube of graphene foam; at right is a close-up of the material as seen with a scanning electron microscope. (Image courtesy of Tour Group/Rice University)

http://bit.ly/2sTg6Td
CAPTION: 3-D graphene foam objects are produced by shining a laser on a mixture of powdered sugar and nickel powder. The laser is moved back and forth to melt sugar in a 2-D pattern, and nickel acts as a catalyst to spur the growth of graphene foam. The process is repeated with successive layers of powder to build up 3-D objects. (Image courtesy of Tour Group/Rice University)

http://bit.ly/2sTlZiW
CAPTION: James Tour (Photo by Jeff Fitlow/Rice University)

The DOI of the ACS Nano paper is: 10.1021/acsnano.7b01987

A copy of the paper is available at: http://bit.ly/2tsuaA1

Related research stories from Rice:

Zap! Graphene is bad news for bacteria — May 22, 2017
http://bit.ly/2qObaNo

Graphene-nanotube hybrid boosts lithium metal — May 18, 2017 http://bit.ly/2rAfP3y

Gas gives laser-induced graphene super properties — May 15, 2017
http://bit.ly/2tsD0xA

Tour testifies on Capitol Hill about graphene ‘space race’ — March 16, 2017
http://bit.ly/2sSRj1p

Graphene foam gets big and tough — Feb. 13, 2017
http://bit.ly/2lKgdt7

Defects are perfect in laser-induced graphene — Dec. 10, 2014
http://bit.ly/2tsttq8

This release can be found online at news.rice.edu.

Follow Rice News and Media Relations via Twitter @RiceUNews

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,879 undergraduates and 2,861 graduate students, Rice’s undergraduate student-to-faculty ratio is 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for happiest students and for lots of race/class interaction by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance. To read “What they’re saying about Rice,” go to http://bit.ly/2g24RkJ.

SourceRice University News & Media

LEAVE A REPLY